Atop Technologies
e-Newsletter
RSS
 
 
go home Support > Download
download Technical Support Contact us Partner zone
Technical Support
Download
FAQ
e-RMA
Warranty Policy
 
 
 
Download
SE5002
2-port RS-232/422/485(D-Sub)
  • Rugged metal case with DIN-Rail/wall-mount
  • 15KV ESD protection for serial signals
  • 10/100Mbps Fast Ethernet full duplex auto negotiation
  • Support multiple link mode with TCP server/client, UDP and Virtual COM mode
  • Monitor, manage and control industrial field devices remotely
  • Configuration: Built-in Web Server/Serial Console/Telnet
  • Windows Base utility for IP configuration
  • Upgrade firmware from remote-PC via Ethernet
Datasheet Quick Start Guide Manual Certificates
Firmware Utility FAQ Others

Manual
Version Release Note Date Size  
V1.3 SE5002/SE5002-S55is User Manual 2009-09-01 1.71MB

Firmware
Version Release Note Date Size  
AP_V3.363 Function Upgrade 2010-01-20 147KB
Kernel_V2.54 Function Upgrade 2010-01-20 53KB

Utility
Version Release Note Date Size  
SerialManager Utility V4.6.0 Function Upgrade 2010-03-19 8.29MB
Virtual COM Driver V4.8.8 First release to support Windows 7. 2009-12-02 5.82MB
V4.0.2 (for Linux OS) Virtual COM driver for Linux version. 2009-11-18 2MB
Download Utility V2.0 Download Utility for SW platform and Multi port platform 2008-06-05 26.1KB

Quick Start Guide
Version Release Note Date Size  
V1.3 SE5002 Quick Start Guide 2009-09-01 220KB

FAQ
Q: Is there a way to keep SW5001 TCP/IP connection in Serial/IP after the Virtual COM port application is terminated?
Q: Is there a way to disable Keep-Alive signal in Serial/IP for SW5001?
Q: We use TTYRedirector on Linux and receive the same message: "Server auth timed out".
Q: I have a SE5001 currently running with the version4.8.5 of the Serial/IP redirector (Tactical Software) that I downloaded it from Tactical software's webpage. License Key: AIAA-MAQQ-ACBQ-MIZX-TFJA. I upgraded due to problems with HW handshake signals, but it didn't solve the problem though. Where I can download the latest stable redirector software?
Q: As attached file for the Serial/IP log of the test we did here, actually, SE5001 will stop transmitting after just around 15 seconds. What’s the problem?
Q: What are steps to set up a Virtual COM port on a SE5002?
Q: In using GW51W-MAXI’s Serial?IP program, what does the following message mean: “Client not licensed for this server” ?
Q: On the SE5002, why can’t I control PTZ motors by RS-422 port in TCP server mode?
Q: How does one find out the MAC address of an ATOP serial server? How does one reset it remotely?
Q: I found couple stranger things of the web-based configuration of SE5001.
Q: I need to transmit data at 250 Kbit/second. Is this possible or is this limited by the hardware capabilities? GW51C-MAXI is specified at 230k transmission rate, and I need 250k. Can it be done?
Q: I would like to remote access the serial server via Internet. What’s the socket port number should I open for it in the firewall?

 
   
 
2F,No.146,Sec.1,Tung-Hsing Rd.,Jubei,Hsinchu 30261,Taiwan,R.O.C. Tel:+886-3-550-8137 Fax:+886-3-550-8131
Copyright © 2010 Atop Technologies, Inc. All Rights Reserved.