Atop Technologies, Inc.

e-Newsletter

RSS

Support > Download

Download

SE5001-S5

1-port RS-422/485(D-sub)

Cigarette pack size
Rugged metal case with DIN-Rail/wall-mount
Watch Dog Timer 1.34 sec. hardware auto reset
15KV ESD protection for serial signals
10/100Mbps Fast Ethernet full duplex auto negotiation
Support TCP server/client, UDP for Virtual COM mode and Tunnelling mode
Monitor, manage and control industrial field devices remotely
Configuration: Web server page/Serial Console/Telnet Console
Monitor IP configuration for Windows
Upgrade firmware from remote-PC via Ethernet
Redundant dual DC power inputs for non-stop operation

	Datasheet		Quick Start Guide		Manual		Certificates
	Firmware		Utility		FAQ		Others

Manual

Version	Release Note	Date	Size
V1.5	SE5001-S5 User manual	2009-08-11	2.50MB

Firmware

Version	Release Note	Date	Size
AP_V3.364	Function Upgrade	2010-02-05	147KB
Kernel_V2.54	Function Upgrade	2010-01-20	51.6KB

Utility

Version	Release Note	Date	Size
SerialManager Utility V4.6.0	Function Upgrade	2010-03-19	8.29MB
Virtual COM Driver V4.8.8	First release to support Windows 7.	2009-12-02	5.82MB
V4.0.2 (for Linux OS)	Virtual COM driver for Linux version.	2009-11-18	2MB
Download Utility V2.0	Download Utility for SW platform and Multi port platform	2008-06-05	26.1KB

Quick Start Guide

Version	Release Note	Date	Size
V1.4	SE5001-S5 Quick Start Guide	2008-06-05	254KB

FAQ

Q:	Is there a way to keep SW5001 TCP/IP connection in Serial/IP after the Virtual COM port application is terminated?
Q:	Is there a way to disable Keep-Alive signal in Serial/IP for SW5001?
Q:	We use TTYRedirector on Linux and receive the same message: "Server auth timed out".
Q:	I have a SE5001 currently running with the version4.8.5 of the Serial/IP redirector (Tactical Software) that I downloaded it from Tactical software's webpage. License Key: AIAA-MAQQ-ACBQ-MIZX-TFJA. I upgraded due to problems with HW handshake signals, but it didn't solve the problem though. Where I can download the latest stable redirector software?
Q:	As attached file for the Serial/IP log of the test we did here, actually, SE5001 will stop transmitting after just around 15 seconds. What’s the problem?
Q:	What are steps to set up a Virtual COM port on a SE5002?
Q:	In using GW51W-MAXI’s Serial?IP program, what does the following message mean: “Client not licensed for this server” ?
Q:	Why I got the screen as below when I was using the Mozilla Firefox browser for the GW51C-MAXI Web-based configuration tool.
Q:	How does one find out the MAC address of an ATOP serial server? How does one reset it remotely?
Q:	I found couple stranger things of the web-based configuration of SE5001.
Q:	I need to transmit data at 250 Kbit/second. Is this possible or is this limited by the hardware capabilities? GW51C-MAXI is specified at 230k transmission rate, and I need 250k. Can it be done?
Q:	I would like to remote access the serial server via Internet. What’s the socket port number should I open for it in the firewall?